yes you can use white vinegar diluted in water to clean your mop. I have just done ot and it worked a treat. make sure that you have the mop positioned so the steam goes into the air. Allow all water to disperse then refill with clean water and and allow that to disperse also. The downside is the smell of vinegar.
 carol
 February 2013 |
I used oust on it . It clears it up and works great . That's oust all purpose descaler .
hippypete
November 2012 |
would be nice if you put a picture of the part etc
keith
November 2010 |
I tried Mal's solution and it worked brilliantly, thank you for posting.
Another Steve
March 2010 |
more of a supplemental question :
I'm taking my Light'n'Easy steam mop apart as Steve ( July 2009) suggests
which hole is likley to be the blocked the one at the top or the one at bottom ?
Thanks
RJ
February 2010 |
Tried Johns solution with no improvement then filled one third of tank with warm water, drop in a Steradent tablet leave for 15 minutes then warm up, clean and refill warm up. It worked for me.
MAL
November 2009 |
Hi i had the same problem, the silver tank inside is blocked, take it apart and clear the scale blocking the hole in the silver tank, mine is as good as new now.
cheers
steve
steve
July 2009 |
i THINK IT'S A PROBLEM OF LIMESTONE. YOU CAN TRY TO PUT WHITE VINEGAR IN THE TANK AND LIGHT UP. IT WILL BE TAKE A FEW MINUTES.
JOHN
May 2009 |
2005
